WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Freemax Maxpod Kit

$19.99

Discover the FreeMax MAXPOD Pod System, a compact portable vaping system, featuring an integrated 550mAh rechargeable battery, 3-tiered power level, and utilize coils from the SaltCoilTech 2.0 Coil Series.

Clear

Description

FreeMax Maxpod

Discover the FreeMax MAXPOD Pod System, a compact portable vaping system, featuring an integrated 550mAh rechargeable battery, 3-tiered power level, and utilize coils from the SaltCoilTech 2.0 Coil Series. Constructed from durable zinc-alloy, the chassis of the MAXPOD Pod System contains the 550mAh integrated battery that can deliver power in a three tiered output system identifiable via a LED Battery Indicator Light. Attached via magnetic connection, the 2mL pod can be refilled via a silicone stoppered side fill system, while coil changes are facilitated via bottom press fit connections. Included are two coils utilizing NS Mesh technology, inspired by the Fireluke and M Pro product series.

Overview

Have you been searching for the perfect pod but keep ending up disappointed by flavors that fade too quickly, complicated designs, or any other limitation? Vaping should be enjoyable, not frustrating. Luckily, your search ends now. The FreeMax Maxpod takes pod-based vaping to the next level. The Maxpod is user-friendly, has coils that get the best flavor from the vape juice, and gives you an improved throat hit. This is just the tip of the iceberg when it comes to the impressive features of the Maxpod. It is optimized for the use of both freebase nicotine and salt nicotine. You can freely switch between the two, as long as you clean the tank fully and don’t mix the two. This vape is also one of the safest devices currently on the market. It comes with several safety features, including protection from short-circuiting, low voltage, and overcharging. With all of this and more, you will find that there is so much to love about the FreeMax Maxpod.

Design

Like most pod-based e-cigarettes, the FreeMax Maxpod is slender and compact, just a little bit larger than a regular cigarette. This makes it discreet and much easier to carry around with you on the go than the much larger box mods. This pod, however, stands out from others with bright, bold colors, each with a geometric design. You can get your FreeMax Maxpod in yellow, red, green, blue, silver, or black.

The IML body is made from a combination of a few different materials, including PCTG, steel, and zinc alloy. This ensures that the vape is light enough to carry around all day but durable enough to handle the normal wear and tear most vapes are susceptible to. The Maxpod feels great in your hand, as well, thanks to the new IML processing technology.

Maxpod Components

This vape has a standard build, resembling many of the pods on the market. The battery is held in the main body of the vape. There is a USB port on the side so that you can easily charge it. This removes the stress of having to keep up with replaceable batteries for other vapes. The battery pack also has an LED indicator that displays various colors and blinking patterns to tell you the battery life, indicates that the vape is working, and alerts you to any safety issues that need to be addressed. There are no buttons on the body of the vape, though. This is a result of the ease of use that this vape offers, but it has the bonus of streamlining the design of the vape.

At the top of the battery, there is a connection for the pod itself. This is the piece that holds your coils and vape liquid. There is a silicone plug on the side of the pod for refilling access. You can insert the NS mesh coil of your choice at an access point on the bottom of the pod. On top of the pod is the mouthpiece. Each of these parts can come apart for cleaning and any other maintenance the device needs.

Specifications

The FreeMax Maxpod is small, but it is capable of an impressive wattage and able to give you a delicious hit from the NS Mesh coils. It measures only 100.81millimeters x 21.81millimeters x 14 millimeters in size and only weighs 56.3 grams. The battery power is 550 milliampere-hour with an output wattage of 8-11 watts. This is pretty strong for a vape of this size. You can trust that the Maxpod is capable of giving you a robust and delicious hit all day. The output voltage remains at a constant 3.3 volts. The pods can hold up to 2 milliliters of vape juice and are easily refillable. The NS Mesh coils that come with this FreeMax Maxpod kit have a resistance of 1.0 and 1.5 ohms.

Vape Safely With the Maxpod

FreeMax went to great lengths to ensure that using this device is as safe as possible for the consumer. Malfunctioning vapes are rare, to begin with, but there is an even smaller chance of any accidents when you use the FreeMax Maxpod. The engineers have built-in protection from any damage from short circuits, open circuits, and low voltage. It also includes an eight-second cut-off time to protect the battery from overheating. The Maxpod even protects your vape from overcharging and over-discharging.

On the off chance that there is a glitch or malfunction in your Maxpod, the LED indicator will communicate an error message. Be sure to read the user manual carefully so that you can recognize these error messages. It’s a good idea to keep your user manual somewhere safe so that you can turn to it if there’s ever an issue.

The LED Indicator

Some vapes come with display screens that give you information about the battery life, voltage, and other pieces of information about the vape. Sometimes these screens are quite small, and some of the information can be hard to read. In its simplicity, the Maxpod doesn’t need a screen to communicate important information to you. The consistent voltage output means there’s one less thing to monitor. You can monitor the battery life via the LED indicator. When the pod is fully charged, the LED light will be white. It will remain white until it reaches 70%. The light will be green between 31-70%. When the LED indicator is red, your battery is at or below 30%, and it’s time to recharge. You won’t be caught off-guard when your battery is suddenly dead in the middle of the day. There is plenty of warning time, so you will know that you need to get to a charger. When the light is red, you should monitor your intake, so the battery doesn’t run out completely.

User Friendly

One of the best things about this vape is the user-friendly design. By removing the need for small but tedious tasks that are necessary for many vapes, the FreeMax Maxpod lets you enjoy your vape quicker.

There is no activation button on this pod. That’s because the battery is activated by you taking a draw on your vape. The coils are heated quickly, and the vapor is created almost instantly. Some vape pens and e-cigarettes require pressing the activation buttons several times to even turn the vape on. You would need to hit the button a few more times before the coils begin to heat up and then wait a few seconds while the coils reach the correct temperature. Instead of having to do so much just for one drag of your vape, the draw-activated open pod system in the Maxpod gives you amazing hits with no wait time.

There’s more to vaping than inhaling the tasty vapor. You also need to refill your pod and replace your coils when they are worn out. These tasks are made easy with the FreeMax Maxpod. You won’t need to take the entire device apart to do these small tasks. The silicone plug on the side of the pod is the refill access point for the Maxpod. The tip of your vape bottle or syringe will fit perfectly in the small hole. Be careful not to overfill the pod. There’s nothing worse than spilling your favorite vape juice all over the place.

Easily replace your coils by removing the pod from the battery and removing the old one from the bottom. Simply slide the new coil into place, snap the pod back onto the battery, and vape on.

The FreeMax Maxpod Saves the Flavor

You will be amazed at the difference in the flavor you get from this vape compared to others you’ve tried in the past. This is all thanks to the speed of the heating mechanism in the Maxpod. As mentioned above, the draw-activated open pod system allows you to get an almost instantaneous hit from your vape. The benefits of this speed are twofold: no more wait time when you want to take a draw and better flavor in every hit.

Many vapes lose flavor over time and can also start to taste burnt. This isn’t because the vape juice has gone bad, but it is because of the overuse of the coils. While the coils heat up and cool down, there is a chance that vape juice will come through the vaporization pathway. If this happens while the coil isn’t hot enough, the liquid won’t vaporize. It will be boiled instead, but the liquid will stay in the chamber with the coils. Once this happens, you’re burning the residual liquid more and more every time you take a hit. This significantly shortens the life of the coils. You need to replace the coils frequently. Until these coils are replaced, each hit will have a worse taste than the last. Because the FreeMax Maxpod heats up instantly when you inhale, it reaches the ideal temperature much quicker.

However, this only resolves the issue of heating too slowly. Other vapes also have an issue with their coils not being heated consistently. With button activated vapes, the coils begin to cool as soon as you release the button to inhale. Inhaling will bring more vape juice into the coil chamber, causing the same issue of residual liquid becoming burned as the coils cool down.

Because the FreeMax Maxpod is activated by inhalation, the heat is maintained the entire time you’re vaping. The heat can vaporize all of the liquid it comes in contact with. The battery releases a consistent voltage of 3.3 volts, which maintains a steady heat for the entire drag.

These wonderful coils have another secondary benefit to them. Because the NS mesh coils are heated to the perfect temperature for the necessary amount of time, there is a reduced risk of being stung by small droplets of vape juice that isn’t vaporized. If enough residue builds up, it could be sucked through the mouthpiece or shot out in random directions when you take a drag from the vape. The absence of residue equals the absence of that stinging pain that residual vape juice can cause.

All of these features make the FreeMax Maxpod an excellent product for those looking to prevent coil damage and minimize potential risks. This vape will reduce the number of times you have to replace your coils and ensures that your vape juice tastes perfect from the first hit to the last.

Limitless Choice of Vape Liquid With the NS Mesh Coils

So much time has gone into perfecting the FreeMax Maxpod. The technician team has been hard at work for three years to create a perfect balance of everything today’s vapers want. Everything from the flavor and coil life to throat hit and nicotine intake has been considered. The FreeMax Maxpod even optimizes its compatibility with 99% of e-liquid options. No matter what your preference of flavor, VG/PG ratios or type of vape juice is, you can have the best experience possible when you use it in the FreeMax Maxpod.

There are some vapes on the market that get the amazing flavor out of minty or sour vape juices but have trouble bringing out the flavors of sweeter, fruitier juices. Because the Maxpod uses the latest technology in their NS mesh coils, you can get the richest, fullest flavor from any kind of vape juice you could ever want. This pod supports it all. You can enjoy sweet, sour, custard, fruit, candy, menthol and mint, desserts, breakfast, vanilla, beverages, or nutty flavors. You can switch them up whenever you want. Just be sure to clean them out to prevent mixing flavors.

Some vapers find the flavor they like the most and stick to it every time. However, changing up the flavor now and then is a good idea. Doing so will help prevent the vaper’s tongue. Vaper’s tongue occurs when your taste buds become too accustomed to a certain flavor. You will become unable to taste your vape juice’s flavor, even though your pod is working perfectly. Vaper’s tongue also causes dry mouth because of the frequent inhalation. If this happens to you, take less frequent hits, drink plenty of water, and put a new flavor in your FreeMax Maxpod.

Not only can the Maxpod handle all sorts of flavors, but it is also compatible with both salt nicotine and freebase nicotine. This is possible because of the innovative technology in the NS mesh coils. These coils are designed with FM SaltCoilTech 2.0, which allows the coils to meet the needs of either form of e-liquid. The NS mesh coils consist of flax cotton, organic cotton, and a honeycomb-shaped mesh, all of which contribute to the versatility of these coils.

It’s important never to mix these two forms of e-liquid because of the difference in potency. The results of vaping a mixture of freebase nicotine and salt nicotine are unpredictable. It is easy to accidentally intake too much nicotine, which is highly toxic in high levels. When you switch between freebase nicotine and salt nicotine, be sure to clean out the pod carefully.

What Method of Vaping Is the FreeMax MaxPod Designed For?

The best vaping method for FreeMax Maxpod is definitely the standard method. Its features aren’t compatible with sub-ohm vaping. The two NS mesh coils that come with this kit have resistances of 1.0 ohm and 1.5 ohms. The Maxpod is also optimized for a stronger throat hit. If you’re looking for a sub-ohm vape, this may not be the one for you.

What’s Included in the Kit?

When you receive your FreeMax Maxpod kit, you will receive several important things. First, of course, is the Maxpod battery, in whichever stunning color you chose. You will also have the pod, which attaches to the top of the battery. The 1.0-ohm NS mesh coil will already be installed in the pod. There will be an additional 1.5-ohm NS mesh coil in the kit as well. You will need to replace one for the other as soon as you notice that your coil is overworked. The kit also comes with the FreeMax Maxpod lanyard and lanyard ring, which you can attach to your Maxpod for easy and safe transport.

You will also receive a USB cable, a warning card informing you of how to safely use the Maxpod, a warranty card, and a user manual. You need to hang on to all of these items, even if you think you won’t need them. If there is any issue you find with your FreeMax Maxpod, you need to have your warranty card to receive the money-back guarantee. It’s also smart to hang on to the user manual and warning card to ensure that you don’t forget all the details of caring for this pod system.

Staff Pick Review

There are so many features to appreciate in the FreeMax Maxpod. All the innovative technology and attention to detail truly makes a difference in your vaping experience.

Variety is important when it comes to choosing a vape. You don’t want to waste money on a device only to find out that it isn’t compatible with the form of e-liquid you prefer or that it doesn’t bring out the flavor of your favorite vape juice. Because the FreeMax Maxpod is capable of handling freebase nicotine and salt nicotine, you can easily switch between them after carefully cleaning the residue from the pod. The specially engineered coils will deliver the fullest, richest flavor possible, whether you like a sugary flavor, a refreshing minty hit, or your favorite meal or beverage. Never again will you take a drag from your pod and be bombarded with a burnt, unappealing taste in your mouth.

The safety features built into the FreeMax Maxpod reduces practically all of the safety risks that come with a vape, or any other electronic device for that matter. There is always a small risk of any of your electronics malfunctioning, but experiencing any of those with the Maxpod is highly unlikely. This advanced vape easily resolves short-circuiting or other glitches with the battery that might happen.

Additionally, because the FreeMax Maxpod has coils that provide the perfect conditions for turning liquid into vapor, there is virtually no risk of your vape spitting hot oil on you. This happens a lot with vapes that don’t have consistent heat throughout the entire drag you take. The residual liquid that boils instead of vaporizing can sometimes shoot out from small holes in the vape, landing on your skin and stinging you. This doesn’t pose a huge health risk, but it definitely isn’t pleasant. You will never have to deal with that pain and discomfort ever again when you choose the Maxpod.

One of the best things about the FreeMax Maxpod is the ease of use. This vape was designed with the consumer in mind. It takes no time at all to replace the NS mesh coils, refill the pod with your favorite vape juice, or activate and inhale that delicious vapor. The combination of the draw-activated open pod system and convenient access points for adding liquid and replacing coils simplifies almost all of the tedious tasks required for vaping. Now you can spend less time maintaining your pod-based vaping system and more time enjoying that tasty vapor.

Final Thoughts

If you’ve been browsing for a new pod-based vaping system, the FreeMax Maxpod might be the perfect device for you. It has all of the qualities a vaper wants out of an e-cigarette. The lightweight and portable design makes it perfect for on-the-go vaping. The maximized throat hit resembles the feeling that one gets from smoking cigarettes, but without the added carcinogenic substances. This makes the Maxpod a great vaporizer for those who are switching to vaping from smoking. Innovative technology within this device gives the Maxpod a quality that makes it stand out among the competition. It is exciting to see everything that FreeMax has been capable of with the Maxpod. This excellent vape will have vapers everywhere looking out for the next device from FreeMax.

Additional information

Weight 0.5 lbs
Color

, , , , ,