You have no items in your shopping cart.

You have no items to compare.


Prewired 510 Battery Connector, Sealed

Prewired 510 Battery Connector, Sealed


Out of stock

SKU: 10352

With this product, you earn 2 loyalty point(s).

  • 11/32 mounting hole

  • Fully assembled and ready to use

  • 4" long

  • 24AWG wire



Prewired 510 Battery Connector, Sealed

11/32 mounting hole. Positive and negative leads are approximately 4in. long

Fully assembled and ready to go. Styles may vary but always the same quality.


Additional Information

Color No
SKU 10352


Product Tags

  • No tags connected to product

Use spaces to separate tags. Use single quotes (') for phrases.


  1. Great! Review by Robbie

    Very Nice connector! Super easy to use in my mods (Posted on 11/2/13)

  2. NOT BAD! Review by curt

    Although 4 of the 6 I bought had poor connections to the center pin (1 just snapped off during manipulation .1 broke a week later and believe it or not 1 saw the negative wire come loose.) Always pre-inspect these before installing. Although the joints are ok some soldering is dull and grainy and this only increases resistance as I'm sure you know. Overall a good product for a little more money. First cant imagine the hassle you will save if you get a good one. Would buy again and also will and have recommended them! Thanks MadVapes for being there! Curtis Lucksinger (Posted on 6/8/13)

  3. Nice way to make mods a little easier Review by curtis

    After melting 2 rubber seals soldering with my overpowered iron, I just ordered 3 of these and they work great. Nice thick multistrand wires on em. Only flaw is that they are just tall enough to allow a mega to be screwed onto them, so mounting them to allow this is a bit difficult as the bottom of it has to be flush with the surface its mounted to. (Posted on 3/4/13)

  4. Modding made less painful... Review by fr0ggie

    These connectors are great. No more fiddling with the middle pin or worrying about melting the insulator. On mine, the bare wire for center connector is a little long, but some heatshrink tubing fixed this quickly. Nice part, MV! (Posted on 10/17/12)

  5. Great Connector Review by Doug

    Sure makes it easy building a mod when you don't have to do those extra solder joints Everyone I have bought work great. (Posted on 10/12/12)

  6. Great Review by jonathan green

    Every one I get works like a champ I recommend these to anyone building mods (Posted on 4/16/12)

  7. Freaking Awsome! Review by Robert Andrews

    I'm so glad they sell these. Especially if you have no solder experience. Little trick I figured out is to hot glue it as soon as you get it, so the wires will not move as much and will keep them in place encase it's soldered week.I'm ordering way more for all kinds of mods. (Posted on 3/9/12)

  8. Just worth it Review by Teena Counts

    These are great! It's so worth the extra $1 to not have to fool with soldering wires to the connectors. I am so far from a good soldering person and these save me and allow me to make a mod with out paying more than double for a pre-made that do not even have recessed connector. (Posted on 3/4/12)

  9. Quality Connector Review by James White

    These are quality connectors, same as the sealed 510 connectors they are often sold out of.If soldering isn't a option these are an easy prewired solution but note the wire used is extremely thin so be gentle until everything is in place. (Posted on 2/25/12)

  10. Vaper Review by Scotty Phipps

    They are easy to use and the work well. (Posted on 2/24/12)

  11. Makes moding easy Review by Ron Whitney

    I have used several of these prewired connectors when making 2AA and 3AAA box mods and they couldn't make life modding simpler. I did have one start leaking after one heavy vaping and hot session, but I figured out that if I use epoxy to seal up the bottom of the connector where the wires are soldered to the connector I have had no further leaking issues with my mods. If it wasn't for that I'd say they're perfect. I give them a good solid 4 stars. (Posted on 2/6/12)

  12. love Prewired Review by alex butte

    Prewired makes it easy to just get started on your mod and they also put enough wire for u to build your mod so u don't have to by extra I have built 13 vv mods and have tried to wire connectors Prewired is the only way to go (Posted on 1/10/12)

  13. not too shabby Review by james stitzel

    bought 4, used them all in aa mods, all but 1 worked perfect. the hot wire on the center post in 1 snapped off before i got to use the mod. thin, solid core wire makes me nervous, but the rest work awesome (Posted on 12/1/11)

  14. Awesome! Review by Wyatt Carsjens

    I hate soldering so this worked perfect for me. Very strong connections. (Posted on 10/29/11)

  15. JJ Review by johnnie johnson

    These do what they are suppost to i have used 10 to 12 to date with no problems. (Posted on 9/26/11)

  16. easy Review by Felipe Villafana

    Extremely easy to connect. I've used these to make mods for friends. They work great! (Posted on 9/21/11)

  17. Solid Review by Eli Grossmann

    I bought two of these and used them in DIY passthroughs. Nice and easy to work with. (Posted on 9/13/11)

  18. 510 battery Review by Jerry Densmore

    I ordered this already wired in case my iron was too hot. Had it for months now and shows no sign of not working, it just works. (Posted on 8/30/11)

  19. Disappointing Review by Ralph Adamson

    I have relied upon Madvapes, and have never been disappointed until now. Of the six I ordered. Non of them had acceptable solder joints. 11 of 12 solder joints were cold (not smooth, but a crystalline grainy surface) indicating that the wire moved before the joint solidified, or insufficient heating was applied. In two cases the wire actually moved freely in the joint. These poor solder connections will result in extra resistance and less voltage to your atty/carto. (Posted on 8/1/11)

  20. For New Modders, Sometimes A Godsend Review by mark linehan

    When I first started modding, I was re-learning soldering from 25+ years ago. I had a heck of a time with the connector wires. Wish they had these when I first started modding. Now I buy them when I am feeling lazy. It is easy to solder the connectors now, but if you are a complete newb or re-learning even like I was, you might want to get one or two of these just to save some frustration in the beginning. (Posted on 7/27/11)

  21. Fat hands Review by michael devegnee

    It really helps when you have large hands and bad eyes to have small parts like this prewired. (Posted on 5/31/11)

  22. Quality could be better Review by John Keene

    Ordered three of these for some unknown reason as I also ordered non-prewired 510 connectors. Two had the center wire loose in the ziploc bag with the connectors upon arrival. Not a big deal to me but it could be for someone starting out. (Posted on 5/17/11)

  23. Don't Solder, BUY THESE!!! Review by Brian Keith

    Seriously, if you can solder, then your fine. BUT, if your a newby or you simply dont want to take the time to mess with this very serious piece that has to be soldered cerrectly, then get say no more!! I bought two of these and was able to do the MADVAPES flashlight mod and CISCO LASER MOD very easily. Worth the savings in your time alone!!! (Posted on 4/9/11)

  24. Cut Your Time Review by Matthew Dalangauskas

    This cut my modding time in half. That was always my problem getting the solder to stick to that middle pin with a solid connection. Well worth the money. (Posted on 3/28/11)

  25. Awesome Review by Clifford Huffman

    Couldn't be easier to use. (Posted on 3/21/11)

  26. A must have for any 1st time modder! Review by Erick Morris

    Great for a first mod box! While I am skilled in soldering, knowing that my connector is not burned through on my first build was the biggest factor in purchasing. For pennies more, the relief is cheap.Great connections, perfect solder flow, long leads, both leads on inside of connector. Nothing bad to say about it. Thanks madvapes for doing the hard work for me! (Posted on 3/17/11)

  27. Couldn't be easier Review by Dan Blakkolb

    After soldering the regular connector for my mods I was really happy to see them come with the wires attached. It make thing so much easier. (Posted on 2/22/11)

  28. Prewired 510 connector Review by N.E.

    This has made my life alot easier. Soldering positive wire is not easy as it looks. Better buy this prewired (Posted on 2/5/11)

  29. Really handy Review by JoeM

    Using a prewired connector really makes it easier, particularly with a box mod. If you're trying these on a Cisco type laser mod, the negative wire is useless since you'll probably need to trim off the bottom of the connector anyway, but it's not a problem. It's worth it not to have to solder the positive lead.Make your build easier and use these. They're well sealed, high quality and well worth the few extra pennies. (Posted on 2/3/11)

  30. 510 connector Review by Mike Picariello

    The connector is good, sealed nice quality and price. The 2 connectors I ordered one had a poor solder connection on the center post and the the wire fell off when I was installing it. I had a bit of a time re-soldering it. The other one looks OK. Check the soldering before using. I would buy it again though. (Posted on 1/29/11)

  31. Excellent connector Review by Ken Schram

    Makes your work so much easier. Highly recommended! (Posted on 1/14/11)

  32. mr Review by steve gaffney

    Make your life easy just buy these with your mod kit (Posted on 12/26/10)


Write Your Own Review

Only registered users can write reviews. Please, log in or register