Welcome to MadVapes!

Shop By Department


Ohm Meter Kit

SKU: 3871

Availability: Out of stock


Quick Overview

  • Build your own ohm meter

  • Accurate to +-0.2%

  • Will read from 0.01 to 9.99 ohms


Ohm Meter Kit

This is everything you need to build your own cartomizer and atomizer ohm meter.

Easily test cartomizers and atomizers without having to use a meter. Simply screw on a cartomizer or atomizer and this tester will show you the ohms. Great for testing ohms or for bad cartomizers or atomizers. The ohm meter will read a 1 in the first digit to the left if there is no current flow through the device. Accurate to +-0.2%. Will read from 0.01 to 9.99 ohms.
Simple and easy to use with native 510 and 901/808 connectors. Extensions or adapters can be used to test other atomizers or cartomizers as well as eGo style atomizers and cartomizers. The test amperage is only 3 milliamps and will not produce heat at the coil of the atomizer or cartomizer you are testing.
Requires 2 AA batteries which are not included.

Additional Information

Color No
SKU 3871

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Worth every penny! Review by Jeremiah
I got this kit because the pre-built ones were sold out and my c2cvaping rechargable ohm reader couldn't read sub-ohms to the hundreds place. However this little beauty reads ohms to the thousands place and better than expected. Not even my cheap ohm reader won't read to this degree.

The wiring was a bit of a pain with tight spaces to work in, but after everything was assembled, it worked like a dream. Thanks madvapes for such an awesome product. (Posted on 10/17/2013)
Great product- minor issues Review by Jareball
just finished building my madvapes.com ohm meter kit. i have to say it was a bit of a pain. also my switch was broken so I had to rebuild it also lucky i was able to just rebuild it didnt have to replace it. works really nice. I really enjoy that is reads sub ohms to .000 instead of just .00. minus the switch issue and the case cracking, while pressing the connectors, i am happy. The problems do not effect functionality just adds character to the meter and helps prevent me from mixing it up with other peoples. (Posted on 10/6/2013)
Great product - EXCEPT!!! Review by Dracconus
I purchased mine from LJesmokes.com for 20 pre-built, and they used a really CRAPPY glue to hold the tester bases, and wiring in place (not where it's soldered, that was obviously soldered.) Because of this when i attempted to test my vivi nova I'd just gotten in, I broke it due to them having it sunk down so far in that i had to yank the damn 510 connector out.
I did resolder everything, and now it's working GREAT!

Moral of the story is this -When you put your base connectors into the plastic make DAMN SURE that you've got the amount of height you need for what you're going to be testing otherwise you're going to have a LOT of fun removing all the glue or whatever you used to hold everything in place!

Otherwise VERY SOLID product! I have a wobbly tip on my solder iron, and I can't count how many times I accidentally hit the PCB trying to do this without a clamp arm, and nothing shorted out at all!
You guys make a BADASS product, and I'm only sorry that I didn't know you had this, and made it, or I'd have ordered it from you.

ALSO - I used a resin core solder, and I've got a sneaking suspicion that LJesmokes didn't, and also didn't tin their irons, because the connections weren't NEARLY as accurate as my amateur re-solder came out to be. (Posted on 1/10/2013)
A must have for rebuildable atomizers Review by John
This kit is fun and easy to build but you should have basic soldering skills. Takes about an hour to make, start to finish. For me it's indispensable now since I'm into the rebuildable atomizers. I can check my coils resistance before putting it on my pv of choice. Saves me time and in the long run money also. In short it's an awesome tool for a diy person like me. Mad Vapes continues its tradition of bringing good affordable products to the vapping community with this handy unit. (Posted on 11/13/2012)
Why you SHOULD buy this! Review by BigDaddyEcig/Mark Linehan
As a dedicated DIY'er and MODder, this is a great kit for practicing your technique's as well as learning a few things. Plus, this kit allows you to quickly test your devices on solid connections rather than fumbling with long probes while trying to press a button at the same time. So basically, I think it is easier to use something like this and you get to build it yourself. If you are not a modder or a DIY'er or are lazy, then certainly a kit like this is not for you. There are a lot of us out there who greatly enjoy building our own devices. That is what MadVapes is all about. Easily acquiring the tools and parts you need for various e-cigarette projects. Anyone can BUY a device, but it is far more rewarding, fun and educational to DO IT YOURSELF. Asking why you would buy this when you could buy a meter is like asking why you should drive your car when you ca hire a chauffer. Because some people enjoy doing it themselves. This is a great kit. MadVapes offers excellent support. (Posted on 8/25/2012)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Back to Top