Kanthal Ribbon Wire Coils, 50 Pack
This is a coil made from lead wires and a Kanthal ribbon wire in the center. The ribbon wire is flattened. This flattened wire appears to aid in the wicking process thereby helping to create larger amounts of vapor from your coil. There are two (2) 22mm leads on either side giving ample wire to make your connection.
Kanthal is an iron-chromium-aluminum alloy with a longer life and higher maximum operating temperature than NiChrome wire. It is generally considered superior to Nichrome in respect of performance and life. However according to who you talk to each has its own uses.
KEEPS BREAKING Review by Joel
I should have listened to the other reveiwers. These are short and they keep breaking at the weld. I tried to soften them over a flame, but it didn't help.I just wasted $12.00 bucks and a lot of my time fooling with these pieces of junk. (Posted on 1/11/14)
Not Good Review by Frank
These are half the length of earlier ones. I wasted my money as they are not useable. (Posted on 11/24/13)
Horrible! Review by Xavier
These are worthless. I was able to only use 2 out of about 25 wires because they keep breaking at the weld. Please save your money and time. Also, they are super short. (Posted on 8/25/13)
Leads way to short! Review by M. jonathan
he nr leads are not even 1 inch long. These are useless for gg atties! (Posted on 8/23/13)