Welcome to MadVapes!


Gripper 510 Extension

SKU: 3703

Availability: In stock

Regular Price: $3.99

Special Price $0.99

Quick Overview

  • Use your tank or atomizer with your Gripper

  • Extends out about 10mm

  • Works with any mod with a 510 extension

With this product, you earn 0 loyalty point(s).



Gripper 510 Extension

If you want to use the gripper with a Tank or an atomizer, this extension will allow you to. The extension is about 53mm long, 58mm including the threads and will extend out of the Gripper about 10mm. If you use a V2 510 Shorty Extension on top of the Gripper Extension an eGo 510 Dual Coil Tank Cartomizer fits perfectly and comes down flush with the Gripper (Shown in the picture). A 510 to eGo adapter also does the trick. This will work with any mod or device that has a 510 extension so it may have other uses for you where an extension is needed. Price is for one (1) Gripper 510 Extension. Any pictures with other parts including the Gripper and eGo DCT are for display purposes only.

Additional Information

Color No
SKU 3703

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Essential to have Review by susyn
With this extension I can use clearo's like the i16 and the ego skirting is just enough to cover the excess extension perfectly. Any CE4 can be used with 510/ego connection but they are getting scarce. This extension is too long to mount a tank comfortably. I know there's a forum starting to discuss some of the Gripper's modifications -so who knows? I luv the Gripper. (Posted on 9/13/2014)
Works, but Too Long for Me Review by Timothy
Thomas suggested a shorter version and I agree. I cut mine down so it extends only 1 mm above the top of the Gripper, just enough to access the air slots to unscrew it.

The whole point of this is to mount a tank, clearomizer or a fat cartomizer, and who needs that bulk sticking up farther than necessary? Looks awkward and unstable. My 18-20 mm tanks now sit down on the Gripper snugly without touching the button assembly, and look more like they belong there. (22 mm tanks are a hair too wide.)

It was a bit fiddly and time consuming to cut this down, re-solder and press-fit, and I wouldn't look forward to doing it again. But the Gripper is versatile and worth investing a little time into. Now I have another Gripper version I'm quite happy with. (Posted on 8/1/2014)
works great but... Review by Donnie
It works great for the gripper! However it could be shorter. It sticks out about 8mm above the surface. Understandable if it gets stuck inside. I'd like it to be flush so I can adapt an ego/510 adapter for tanks. (Posted on 4/24/2014)
i need this Review by zack
i need one of these (Posted on 3/3/2014)
works great! Review by The Dude
Works great with the gripper i use it to keep my gripper upright in the cup holders of my car. (Posted on 2/20/2013)
View all

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Back to Top