Product Description
Details
eGo Battery Airflow Controller
This is a device designed to control the airflow on an eGo battery when using 510 tanks, atomizers or cartomizers. If you are using a tank or other device where the hit is thin then this is the solution. The Airflow Controller serves to cover the airflow notches on an eGo battery increasing the resistance felt when taking a draw off of your electronic cigarette.
The Airflow Controller screws onto the eGo battery where an eGo cone would usually go. Attach the Controller first and then attach your tank or cartomizer. With the Controller screwed on all the way down the airflow notches are unimpeded. But as you unscrew the Controller it rises up and starts to cover the airflow notches on the battery. On a tank you can adjust it all the way until it is snug under the tank. On a standard 510 cartomizer or atomizer it will remain flush with the outside of the carto or atty.
Please notre that the Controller does not work with eGo tanks, cartomizers or clearomizers as those cover the outer threads on the eGo battery.
Additional Information
Additional Information
| SKU | 4157 |
|---|
Reviews
- Completes my ecigReview by fr0ggie
-
This is great if you use a 510 tank on your ego. It covers the threads nicely and lets you have one more aspect of control over your vaping experience. (Posted on 12/26/12)Rating - nice to tighten drawReview by Erin
-
My biggest complaint with cartos was loose airy draw and this solves the problem. It does require occasional readjusting, but not every draw in my experience. (Posted on 11/29/12)Rating - ok wouldn't buy anotherReview by mike
-
this thing works great as far as controlling the air flow. however there is no way of locking it in a certain position so you basically got to adjust it every time you vape if you wanna set in inbetween fully closed or fully open (Posted on 11/3/12)Rating
