Product Description
Details
AcryliMax Acrylic Variable Volt APV, Stormy Grey
This is a MadVapes exclusive. Introducing a new variable volt APV manufactured by MadVapes right here in the USA!!!
This is a variable volt APV made by madvapes that uses the same circuit board as the Zmax in a colored acrylic tube. This is really a variable power mod because you have the option of adjusting either your voltage or your power (watts). The AcryliMax adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments. The AcryliMax is made of a clear durable acrylic and has a maximum output of 4 Amps
The AcryliMax can read your output voltage, battery voltage and cartomizer / atomizer resistance. This APV does it all.
With a side mounted button, the 510 connector is free to accept any 510 tank. And with the power of varaible volt you can use almost any tank or carto you have. In addition there are ample vent holes in the side of this APV for added safety.
The AcryliMax will accept the following batteries: Button Top IMR 18650, TrustFire Protected 18650 Battery, 2400mAh, TrustFire Protected 18650 Flat Top Battery, 2400mAh, Ultrafire Protected 18650 Battery, 2400 mAh, or the MarsFire Protected 18650 Battery, 2600mAh.
Never use non-rechargeable batteries in any device. Only use the recommended batteries for this device.
All adjustments and settings are made with the push button switch. This includes a setting to turn your AcryliMax off for safe travel in your pocket, bag or purse.
There is a 90 Day warranty for device failures under normal use.
Click here to see if you you have the correct atomizere or cartomizer for your device.
Cartomizers, tanks, batteries or other accessories shown in the photos are not included. This is for the AcryliMax unit only.
Click here do download the manual
Additional Information
Additional Information
| SKU | 4145 |
|---|
Reviews
- disappointedReview by jennifer
-
Received my acrylic zmax today and it was a let down. Quality is very low. Ordered with another person and theirs-also acrylic-came with the case already cracked. The battery rattles around in the case. No manual came with this so I had to hunt for instructions via youtube. The menu system is a nightmare to operate. I have 2 provaris so I am comfortable using this type of menu system. I still havent got it completly figured out. The button is cheap plastic. I have seen the stainless steel version of this pv and it is of higher quality. The acryliczmax wont survive a drop on a surface harder than carpet.Rating
If I had to make a recomendation on the zmax it would be spend the extra money and get the stainless steel and pass on the acrylic version. (Posted on 10/24/12)
