AcryliMax Acrylic Variable Volt APV, Copperwood

AcryliMax Acrylic Variable Volt APV, Copperwood

This is a MadVapes exclusive.  Introducing a new variable volt APV manufactured by MadVapes right here in the USA!!!

This is a variable volt APV made by madvapes that uses the same circuit board as the Zmax in a colored acrylic tube.  This is really a variable power mod because you have the option of adjusting either your voltage or your power (watts).  The AcryliMax adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments.  The AcryliMax is made of a clear durable acrylic and has a maximum output of 4 Amps

 The AcryliMax can read your output voltage, battery voltage and cartomizer / atomizer resistance.  This APV does it all. 

With a side mounted button, the 510 connector is free to accept any 510 tank.  And with the power of varaible volt you can use almost any tank or carto you have.  In addition there are ample vent holes in the side of this APV for added safety.

The AcryliMax will accept the following batteries: Button Top IMR 18650, TrustFire Protected 18650 Battery, 2400mAh, TrustFire Protected 18650 Flat Top Battery, 2400mAh,  Ultrafire Protected 18650 Battery, 2400 mAh, or the MarsFire Protected 18650 Battery, 2600mAh.

Never use non-rechargeable batteries in any device. Only use the recommended batteries for this device.

All adjustments and settings are made with the push button switch.  This includes a setting to turn your AcryliMax off for safe travel in your pocket, bag or purse.

There is a 90 Day warranty for device failures under normal use.

Click here to see if you you have the correct atomizere or cartomizer for your device.

 Cartomizers, tanks, batteries or other accessories shown in the photos are not included. This is for the AcryliMax unit only.

Click here do download the manual