You have no items in your shopping cart.

You have no items to compare.


510 Battery to eGo Atomizer Adapter

510 Battery to eGo Atomizer Adapter


In stock

SKU: 3170

With this product, you earn 2 loyalty point(s).

510 Battery to eGo Atomizer Adapter



510 Battery to eGo Atomizer Adapter

Use your eGo Atomizers/Cartomizers on your 510 batteries. Has the threads for cone also.

Approximate Dimensions:

Length: 15mm

Diameter: 12mm


Additional Information

Color No
SKU 3170


Product Tags

  • No tags connected to product

Use spaces to separate tags. Use single quotes (') for phrases.


  1. works but sticks to the tank Review by dale

    item works fairly well except sometimes have to use pliers to remove the adapter from a clearomizer or other tank as it sticks inside. Pliers can easily damage the threads that screw into my EGO battery side as this is really the only spot to hold onto with the pliers.
    Items does work just be careful. (Posted on 7/23/14)

  2. It works Review by Ronnie

    It works. Threading could be a tad bit bigger. But im just careful when I use it for my smok tech EBC tanks on my sentinel. (Posted on 6/21/14)

  3. review for item not used as intended Review by Chefjoosie

    I don't use these as adapters, so I can't comment on the male end.

    Used as an ego connector, these are excellent. The center pin comes out easily for soldering. The female 510 threads are harder to strip than other adapters or connectors I've used. And I haven't had any issues with the center pin being too high or too low for a good connection on any of my attys/cartos/tanks. (Posted on 4/7/14)

  4. not so good Review by gene

    did not screw into my VAMO very well. very loose fit.
    would not recommend (Posted on 6/5/13)

  5. DONT BUY THESE Review by Harry

    This ruined my Lavatubes threads. I emailed the company and was refunded my 3 bucks, and asked them to check their stock with actual fit items. I wouldn't have ordered this had I not ordered a Kanger T3M tank. I asked if they wanted to make this right to send me a new one and a 510 to 510 shorty extension. It could have been sent snail mail at $.42 cent shipping. No go on that. 80 dollar mod is ruined due to poor machining. This item is best left on their shelf. (Posted on 1/30/13)

  6. If You Gotta, You Gotta! Review by Larry

    I've been through 3 of these adapters in the past few months. All 3 have their male ends (oh damn, what we could with that statement) stuck in an ego cart. Since there is nothing at the male end is exposed, I had to use needle nose pliers for the extraction. The adapter warped and would no longer screw into the 510. When trying to circularize (fix :) the 510 side it broke. - all 3 of them.

    Looking for other adapter brands, I found most places were out of them. So had to get a few more here. Service etc is great here but this product sux.

    Should I be expected to buy 1 for 1 carts to adapter? I use the adapter on the mod, not the cart. Am I wrong?

    Anyway that's why if you gotta, you gotta! :) (Posted on 11/16/12)

  7. Eh Review by L

    It's decent (Posted on 10/2/12)

  8. It's okay Review by Joshua

    It work okay. as mentioned its male end is built like first one broke, ordered 2 more...if these break I'm done with this brand. The wider area is to small for a stardust, it fits but not snug...I'm using these on my lavatube. As for style, it looks very good and it is hidden well. (Posted on 10/2/12)

  9. MEH Review by Duell

    Broke in two days. Male connection broke off, leaving only the pin on the 510 end. Junk.

    Two days, therefor, two stars. Do not recommend. (Posted on 9/10/12)

  10. Striker911 Review by Travis Nibler

    The male section on this does not have very good threads. The female positive pin is not wide enough and is a pain cause you cant tighten the tank down or it will spread the carto connection causing leaks and if its just snug it will need to be retightend over and over. All and all its cheap but I would rather have paid more for a better adapter. Adding a star for the price alone. (Posted on 6/17/12)

  11. works perfectly Review by paul christensen

    bought this to use my vision stardust on my boxmod. It worked perfectly for this. (Posted on 5/28/12)

  12. Works Good Review by Patricia Dwyer

    Bought these so that I can use my Stardusts on my LT. Works great. Would give 5 stars but had one break off in my LT. (Posted on 5/4/12)

  13. Thanks, Mad Vapes Review by William Merrell

    Can use my Mega Dual Coil Cartamizer wit my variable strength Vtube mod. Works great. MV has fast shipping good prices. (Posted on 5/2/12)

  14. Love it! Review by Kim Straub

    Perfect for my LT-Stardust combo! Looks and works great! (Posted on 4/22/12)

  15. Works great Review by Gladys Devant

    Using this with my Stardust and it works great!! It has a tendency to sit crooked due to the threads being crooked on the battery end, but it doesn't affect perfomance. Maybe the next one will be straight threaded :) (Posted on 4/22/12)

  16. I've used better Review by Dustin Rogers

    I bought an eGo 2 510 adapter from another site a while back that was a little different. This one works, though it feels like it has a loose fit. The eGo side is harder to clean because of it's design.While it works, I was disappointed and will not be buying this particular eGo 2 510 adapter again in the future. (Posted on 2/8/12)

  17. Awesome! Review by Carlton Meredith

    Works great on my Chrome Silver Bullet! (Posted on 1/19/12)

  18. It Works Review by Scott Mills

    Picked one up to use with my F1/ego -w's on my mods and works great. (Posted on 1/8/12)

  19. Defective Review by David Schlesinger

    The outside E-Go threads were welded on backwards. Nothing would thread on. If you took the adaptor off, everything would thread fine the wrong way. (Posted on 12/16/11)

  20. these do the job Review by JohnRoss fricano

    turn any ego carto/tank system in to a regular 510 connection (Posted on 12/7/11)

  21. great addition Review by Jon Steir

    fit a eGo dual coil cart to box mod perfectly, plus center hole fits multimeter probe for vv adjustments. (Posted on 8/21/11)


Write Your Own Review

Only registered users can write reviews. Please, log in or register