510 Auto Switch
This is an automatic switch that can be used to make an auto box mod or device of your design that does not need a push button switch. We use these in our auto box mods and they work great.
The red wire is for power, the black wire is ground and the white wire is your control wire and activates the blue LED on the circuit board.
There is no warranty on these switches because they are DIY parts.
Questions Review by Joseph
Are any technical specs available? For example; what voltages are acceptable? How much current can it put out? (Posted on 5/19/13)
good for a while Review by billy
switch will short if you leak any juice on it (Posted on 11/19/12)
these work great Review by Brandon
the switch is great i used it in a simple mod with dual coil tank it acts a little funny with a imr battery i need to take a puff with a regular carto to get the voltage down on the battery or else it doesnt work right other than that it works the best of any auto batery i have used and with the 14500 batery it gives a good vape but i wish it had a higher amp limit (Posted on 10/21/12)
nice light duty switch Review by nicholas
So far so good. Im running it in a 14500 1aa box mod
and it seems to work great for anything over 2ohms.
I put a 1.5ohm dual coil on it but it started acting funny. So, this would make a good beginner mod switch for someone that likes 3.7v and +2ohm.
Put a 510-Ego adapter on it so if ya leak the switch wont get ruined. (Posted on 8/30/12)