|
| |
If you are looking to make a discreet box mod, then this is a great size. I make mine using small tactile switches and generally mmount the connector at an angle on the corner. I find this angle adds to the comfort of the mod, but it also helps as you don't have to mess with the battery contact because in the single batt boxes, the open slot is fairly narrow. |
| |
Reviewed by: mark linehan from Salem, MA.
on 7/28/2011 |
|
 |
| |
these are nice, i like them, you can build a great small fit in your pocket mod out of them |
| |
Reviewed by: gerard arena from clayton NC.
on 11/14/2010 |
|
|
| |
Great little box. Came in mail today and in no time I was vaping away with very little work. Put the fast changing led and micro switch and flush mounted the connector. Little smaller than a stick with a bigger battery. Fun and easy to use. Thanks Madvapes |
| |
Reviewed by: jerry from Chesterfield SC.
on 9/21/2010 |
|
|
| |
Great little box. does need a homemade switch. but can fit a conector fully resesced if you use the small nickel ones Madvapes sells. |
| |
Reviewed by: Jordan from Indiana.
on 9/7/2010 |
|
|
| |
Love this box. Small but has enough room to fit everything you need in it. You can really pack a lot into the side bay! |
| |
Reviewed by: Chad from Oahu, Hawaii.
on 8/24/2010 |
|
|
| |
With a bit of dremeling, clipping and compressing, this box will fit a protected 14500, flush mount 510 connector, tactile switch, LED and regulator with control pin. Makes for an excellent little box mod! |
| |
Reviewed by: Erik from San Mateo, CA.
on 5/6/2010 |
|
|
Shopping Cart - 0 item(s)/Total: $0.00
